Direct Lift B52-4×50 Cotter Pin 4mm x 50mm for 9K Parking & PP9+ 9K 4-Post Lift Runway & Hydraulics

Description

Direct Lift B52-4×50 Cotter Pin 4mm x 50mm for 9K Parking & PP9+ 9K 4-Post Lift Runway & Hydraulics

Replace missing, worn, or damaged lift hardware with the B52-4×50 Cotter Pin 4mm x 50mm, listed for use on 9K Parking & PP9+ 9K 4-Post Lift Runway & Hydraulics. This hardware is used when servicing the specified Direct Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: B52-4×50
• Store SKU: DIT2450
• Component: Cotter Pin 4mm x 50mm
• Listed Application: 9K Parking & PP9+ 9K 4-Post Lift Runway & Hydraulics

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 82 in the drawing image above.

Fits the following lift models — part number B52-4×50 appears in the parts breakdown of each of these lifts: Direct Lift 9K Parking (wide version), PP9+ 9K Four-Post.

This 4mm x 50mm cotter pin is shown in the Main Side Runway & Hydraulics Components diagram (Figure 3) of both parts breakdowns. It secures pins and hardware in the runway and hydraulic component connections on the main side of the lift.

Direct replacement for the OEM callout in Figure 3. Always use a new cotter pin when reassembling runway or hydraulic hardware. Confirm your breakdown’s callout before ordering.

Cross-check part number: Direct Lift B52-4×50. This is a Direct Lift replacement part.