Direct Lift DP8-2010DC Safety Lock A for 7K / 8K / PP8+ Four-Post Lifts

Description

Direct Lift DP8-2010DC Safety Lock A for 7K / 8K / PP8+ Four-Post Lifts

The DP8-2010DC Safety Lock A is listed for use on 7K / 8K / PP8+ Four-Post Lifts and is intended for service or repair of compatible Direct Lift equipment. Match the reference part number, component description, and listed application to your original lift part before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: DP8-2010DC
• Store SKU: DIT10DC
• Component: Safety Lock A
• Listed Application: 7K / 8K / PP8+ Four-Post Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 68 in the drawing image above.

Fits the following lift models — part number DP8-2010DC appears in the parts breakdown of each of these lifts: Direct Lift 7K Four-Post Parking, 8K Four-Post Parking, PP8+ 8K Four-Post, PP8+ Long 8K Four-Post, PP8S 8K Four-Post.

Safety Lock A is the latch that engages the lock ladder as the lift rises, mechanically supporting the crossbeam at height so the load is never resting on hydraulics alone. As a primary safety component, it must be replaced immediately if worn, deformed, or cracked.

Genuine Direct Lift replacement part from the Light Duty-Direct line. The lift uses A and B safety locks; verify the position against Figure #2 (Safety Lock B is DP8-2010).

Fits these lifts:

• Direct Lift — PP8+ Long (8,000 lb four-post); 7K four-post parking lift; DP8 (8,000 lb four-post parking); PP8+ (8,000 lb four-post)