Need Help? 
Description
Accuturn Equalizer Cable 1-1473 for AC1776S and AC1776SVGL 2-Post Lifts
The equalizer cable is a critical safety component on 2-post lifts. It synchronizes both lift arms during raising and lowering so the vehicle stays level throughout the cycle. When a cable shows fraying, kinking, visible wear, or uneven arm movement, it must be replaced promptly. Always replace both equalizer cables at the same time to maintain balanced tension across both columns. Before ordering, verify your lift’s model number from the ID tag on the column – not from the motor label. Note that this cable has threads on both ends of the assembly – confirm your existing cable matches this configuration before ordering, as some lifts with these model numbers use a non-threaded end on one side.
Product Information
- Brand / Equipment: Accuturn
- Manufacturer / Reference Part Number: 1-1473
- Store SKU: ACN1473
- Component: Equalizer Cable (Wire Rope)
- Material: Galvanized steel wire rope
- Listed Application: Accuturn AC1776S and AC1776SVGL 2-Post Lift
Fitment & Ordering Notes
Verify your lift model and serial number from the ID tag on the column – not the motor. This cable has threaded fittings on both ends. Before ordering, confirm that your existing cable also has threads on both ends, as some lifts in this family use a non-threaded end on one side. Replace both equalizer cables at the same time to maintain proper arm synchronization. Contact the seller at 866-902-6060 with your model number and serial number if you are uncertain about fitment.
Additional Product Information
Due to variations in lift production over time, the part number shown in your lift’s diagram may not always match. Verify using your lift’s model number and serial number, not the diagram part number alone.
