$59.00
This is for SINGLE drop in 3″ height extensions for bendpak lifts with a 1 3/8 pin.
Bendpak # 5746390,5215751,BH-7479-94, BH7479-94
Fits Bendpak Models: MX10AC, MXACX MX10CX, MX10C, XPR-9S, XPR-9S-LP, XPR-9DS, XPR-10S, XPR-10S-LP, XPR-10S-168, XPR-10AS, XPR-10AS-LP, XPR-10AS-168, XPR-12FDL, XPR-12CL, XPR-15CL, XPR-18CL, XPR-12CL-192, XPR-15CL-192, XPR-18CL-192 RJ6, RJ6000, Rj4500,BP9,BP7,BP9AC,BP7AC,SR7,SR8AC,HP12 and MANY MORE
ALSO FITS DANMAR 2 post lift with 1-3/8 pin diameter
Please read full description below before ordering.
This is for a Single drop in 3″ height extensions for bendpak lifts. These nesting extensions have a 1 3/8 pin diameter (please check your pin diameter before ordering). These will fit on most Benpak lifts just make sure yours are the Drop in style. These work with round, square, and rectangle weldments that have a 1 3/8 diameter peg on the bottom. These will help you clear running boards, and lift trucks with higher frames.
These are made in the USA.
Fits Bendpak Models: XL-9,XL-7,PR9,PR7,MX10AC, MXACX MX10CX, MX10C, XPR-9S, XPR-9S-LP, XPR-9DS, XPR-10S, XPR-10S-LP, XPR-10S-168, XPR-10AS, XPR-10AS-LP, XPR-10AS-168, XPR-12FDL, XPR-12CL, XPR-15CL, XPR-18CL, XPR-12CL-192, XPR-15CL-192, XPR-18CL-192 RJ6, RJ6000, Rj4500,BP9,BP7,BP9AC,BP7AC,SR7,SR8AC,HP12 and MANY MORE
Also Fits Danmar 2 Post hoist with 1-3/8 diameter pins.
Bendpak # 5746390,5215751,BH-7479-97,BH7479-94
-if your lift has screw up style these are not the ones for you
Any questions or concerns please don’t hesitate to call us at (866)-902-6060.
| Weight | 14 oz |
|---|---|
| Dimensions | 12.3 × 9. × 1 in |
You must be logged in to post a review.
Reviews
There are no reviews yet.