Need Help? 
Description
John Bean 6-1936 / AB-1400 Hydraulic Power Unit for 4-Post Car Lift – SPX Stone (Fenner)
This SPX Stone (Fenner) hydraulic power unit replaces the John Bean 6-1936 / AB-1400 power pack on many 4-post car lifts. SPX Stone (Fenner) has manufactured hydraulic power units for John Bean, Wheeltronics, and Snap-on lifts for decades. The unit is assembled and tested in the USA and carries ETL certification. The pump outlet can be positioned on either side to match your existing pressure-line routing, and the universal mounting bracket simplifies installation.
Product Information
- Brand / Manufacturer: SPX Stone (Fenner), assembled in the USA
- Manufacturer / Reference Part Number: 6-1936 / AB-1400
- Store SKU: SP10AH-2
- Component: Complete hydraulic power unit (motor and pump)
- Voltage: 208-230V single phase, 60 Hz
- Motor: 2 HP, 3450 RPM (3.5 HP torque equivalent)
- Flow Rate: 2.1 GPM
- Oil Reservoir: 4-gallon tank
- Fluid Compatibility: Standard hydraulic oil or Dexron II / AW32 ATF
- Certification: ETL Certified
- Warranty: 1 year
- Listed Application: John Bean 4-post 12,000 lb lifts (43102Q, 43102QE), Wheeltronics M#EELR101A and Quadrack 12000 series, Snap-on 4-post 12,000 lb lifts
Compatible Makes / Verified Fitment Models
The following models are listed at autoliftpartsplus.com for the AB-1400 / 6-1936 power unit:
- John Bean: 43212L, 43212Q, 44212Q, 44212OE, 44212OQE, 43102Q, 43102QE
- Wheeltronics: 10424AF, 12402, 12402AF, 12405AF, 12405CW, 12405ST, 12406, 12407, 12407AF, 12407AFX, 12407XCW, 12430
- Accu-Turn: AC12406, AC12405AF, AC12405AFM, AC12407, AC12407AFM, AC12407XT, AC12407XFXM, AC12402, AC12402XT
- Ammco/Hennessy: S4120-NA, S412CSA0, S412CSA2, S4120SA0, S412SS0, S4120SA, S4120SS
- Hofmann: FPF12172, FPA12172
- Magnum / American Tire Distributors: WH-12Q172, WH-812405, WH-12QA172AL, WH-812407, WH-120EAL, WH-120EALH, WH-812407AFX, WH-120EXTCW, WH-EXTCWH, WH-12E172, WH-12E21
- Snap-On/Sun: EELR102A, EELR102AQ3, EELR103A, EELR132A, EELR132AX
Replacement / Cross-Reference Numbers
- John Bean 6-1936
- AB-1400 / AB1400
- 61936
- EELR101A
Fitment & Ordering Notes
Always verify your lift model and serial number before ordering. The serial number is located on the ID tag on the lift column, not on the motor. Replacing the hydraulic power unit does NOT increase the rated lifting capacity of the lift. Never exceed the rated capacity of your lift.
Additional Product Information
WARNING: Replacing the hydraulic power unit DOES NOT INCREASE THE RATED CAPACITY OF THE LIFT. Never lift more than the rated capacity of any lift – structural failure WILL occur.
Call 866-902-6060 if you need assistance confirming fitment before ordering.
