Challenger CL10 CL10v3 Power Unit / Motor & Hydraulic Pump for Car Lift A1201-17

Description

Replacement Power unit for Challenger CL10 , CL10v3, CL10V3-3

Fenner Stone SPX Hydraulic Pump for Challenger Hoist with capacity of 10000lbs

Complete replacement hydraulic Power unit for most CL10 models.  Includes hydraulic tank, pump, motor & switch. Replaces MTE Units and Emerson / Fenner units.

Made by SPX Stone (Fenner) brand which are built in the USA, and have been the brand of choice for all challenger  for the past 30 years. 

• ETL Certified.
• 2.1 Gallons per Minute flow rate.
• 208-230 volt single phase. 60 hz.
• 2 hp 3450 rpm motor (3.5 hp motor torque equivalent).
• 4 gallon tank.
• Compatible with standard hydraulic oil or Dexron II transmission fluid .
• Pump outlet can be on either side of unit to allow pressure line to be mounted in the same manor your current power unit uses..
• Universal mounting bracket.
• 1 year warranty.
• Made in the USA.

Can replace many of the following brands of power units: Fenner, SPX, Stone, MTE, WEG, Monarch

OEM / Aftermarket Interchanges:

• BH-7520-08, BH-7006A-19, BH-7006A-18, BH-7006A-17, BH-7006A-16, BH-7006A-15, BH-7006A-14, BH-7006A-13, BH-7006-01LS-19, BH-7006-01LS-18, BH-7006-01LS-17, BH-7006-01LS-16, BH-7006-01LS-15, BH-7006-01LS-14, BH-7006-01LS-13, BH-7006-19, BH-7006-18, BH-7006-17, BH-7006-16, BH-7006-15, BH-7006-14, BH-7006-13 .
• AB9367, AB1270, 17300001 ,
• Replaces Challenger AB-9367, Challenger A1201-17
• Challenger Lift hydraulic car lift pump, Challenger Hoist Motor, Challenger Lift Electric Pump

WARNING: Replacing the hydraulic power unit DOES NOT INCREASE THE RATED CAPACITY OF THE LIFT! Never lift more than the rated capacity of any lift as structural failure WILL occur!